This post may contain affiliate/referral links. It is a way for this site to earn advertising fees or commissions by advertising or linking to certain products and/or services. Please see our Privacy Policy for details.

Our readers have some amazing questions, and this one is no exception. In fact, this is one of the most common questions we receive from readers:
How do I clean my streak plates after testing minerals?
If you use mineral streak plates often, you already know how quickly they can go from clean and useful to dusty, streaky, scratched, and stained. One minute you are testing a few minerals, and the next your white streak plate is covered with dark gray, reddish brown, yellow, and black marks. Your black streak plate may be coated with pale powdery lines that make it difficult to see the next mineral’s streak.
The good news is that streak plates are easy to care for, especially if you clean them regularly. Some marks wipe away with warm soapy water. Others need a little more scrubbing power. And eventually, after lots of testing, some plates may become too scratched or stained to use well and will need to be replaced.
This article walks you through what streak plates are, why they get dirty, how to clean them, and when it is time to start fresh with a new plate. Be sure to watch the video below for a visual demonstration of how to clean your streak plates step by step.
What Is a Mineral Streak Plate?

A streak plate is a small piece of unglazed porcelain tile used to test the streak color of a mineral. Streak plates are usually small squares or rectangles, often around 1 inch by 1 inch, 1 inch by 2 inches, or 2 inches by 2 inches.
They commonly come in two colors: white and black.
White streak plates are usually used for dark-colored minerals because the powder is easier to see against the light background. Black streak plates are helpful for light-colored minerals because pale streaks show up better on the dark surface.
The plate is unglazed, which means it has a slightly rough surface. That rough porcelain surface is what allows the test to work. When you rub a mineral across the plate, a small amount of the mineral is ground into powder and left behind as a colored mark.
That colored mark is the mineral’s streak.
What Is the Mineral Streak Test?
The mineral streak test is one of the basic tests geologists use to help identify minerals. A mineral’s streak is the color of the mineral in powdered form.
This is important because a mineral’s outside color can sometimes be misleading. Weathering, impurities, surface coatings, and natural variation can change how a mineral looks. The streak color is often more consistent than the mineral’s outer appearance.
To test a mineral’s streak, you rub the mineral firmly across the streak plate and observe the color left behind. You do need to press fairly hard because the goal is to crush a tiny part of the mineral into a fine powder on the plate.
That powder is what you are looking at — not a scratch from a marker or crayon-like line, but the powdered mineral itself. For more detailed instructions, you can read this article about how to perform the perfect streak test.
Why Do Streak Plates Get Dirty?
Streak plates get dirty because that is exactly what they are designed to do. Their job is to collect mineral powder.

Each time you test a sample, some of the mineral rubs onto the porcelain surface. Softer minerals often leave a clear powdery streak that can be fairly easy to clean. Dark minerals, metallic minerals, and strongly colored minerals may leave marks that are more stubborn.
Over time, the plate may also become scratched. This is especially common when testing harder minerals. Once the surface is scratched, mineral powder can become trapped in the grooves, making the plate look stained even after you wash it.
A well-used streak plate often looks a little rough. That is normal. But if the marks are so heavy that you can no longer clearly see new streak colors, it is time to clean the plate or replace it.
A Quick Note About Hardness
Streak plates have a hardness of about 7 on the Mohs Hardness Scale. The Mohs scale is the scale geologists use to compare how easily minerals scratch one another.
Because streak plates are around hardness 7, minerals softer than the plate can usually leave a streak. Minerals harder than the plate may not leave much powder at all. Instead, they may scratch the porcelain.
Quartz, for example, has a hardness of 7, so it may scratch or mark a streak plate rather than leaving a helpful streak. Minerals harder than 7, such as corundum or diamond, are too hard for a standard streak plate and will scratch the surface.
Those scratches are one reason older streak plates become harder to clean. The mineral powder can get ground into the scratched porcelain, especially after repeated use.
Methods for Cleaning Streak Plates After Use
There are two effective methods for cleaning streak plates.
Cleaning Method 1: Warm Soapy Water and a Sponge
The simplest way to clean many streak plates is with warm, soapy water.
Start by placing the streak plate in warm water with a small amount of dish soap. Let it soak for a few minutes. This helps loosen mineral powder from the surface.
After soaking, use a kitchen sponge to scrub the plate. For many softer mineral streaks, this works well. You may see the powder begin to lift off the surface as you scrub.
Rinse the plate thoroughly with clean water and dry it with a towel. Once dry, check the surface. If the plate looks clean enough to see new streak colors clearly, it is ready to use again.
This method is a good first step because it is simple, inexpensive, and gentle. It works especially well when you clean plates soon after using them instead of letting mineral powder build up over many testing sessions.
Cleaning Method 2: Use a Magic Eraser
If warm, soapy water does not remove the marks, try using a Magic Eraser-style cleaning sponge.
These scrubbers are especially helpful for older streak plates or plates that have stubborn mineral stains. To use one, wet the Magic Eraser with water and gently rub it over the streak plate. You do not need to add much pressure at first. Let the sponge do the work.
As you scrub, you may see the mineral marks fade or disappear. Rinse the plate after cleaning and dry it before storing or using it again.
This method can work surprisingly well on marks that regular soap and water cannot remove. It is a useful tool to keep with your mineral testing supplies, especially if you do a lot of rock and mineral identification activities with students. For plates that are older and scratched, you can use this handy scrubber called the Magic Eraser. These are made by Mr. Clean, and you simply get them wet and then rub them over the streak plate.
When Should You Replace a Streak Plate?
You should replace your streak plate when it becomes so scratched, stained, or dirty that cleaning no longer restores a usable surface.

This is completely normal. Streak plates are tools, and tools wear out over time. The more often you use them, the more quickly they will show wear.
Luckily, streak plates are usually inexpensive and easy to replace. If you use them frequently in a classroom, homeschool program, rock club, summer camp, or geology kit, it is helpful to keep extras on hand.
You may also want separate plates for different uses. For example, you might keep one white plate and one black plate for careful identification work, and a few older plates for messy demonstrations with kids.
Tips for Helping Streak Plates Last Longer
Regular cleaning is the best way to extend the life of your streak plates. Try cleaning them after each activity instead of letting many layers of mineral powder build up. It also helps to avoid testing minerals that are much harder than the plate unless you are intentionally demonstrating hardness. If a mineral scratches the plate instead of leaving a powdery streak, that scratch will remain.
When working with children, explain that streak testing requires firm pressure, but it does not require grinding the mineral into the plate as hard as possible. The goal is to create a small amount of mineral powder, not to carve deep grooves into the porcelain.
Store your plates dry and separate from heavy mineral samples that may chip or scratch them in a box or bag.
A Clean Plate Makes a Better Test
With a little care, your streak plates can last through many rock and mineral investigations. Whether you are teaching kids, building a mineral collection, or testing mystery samples like a geologist, clean streak plates make the process easier, clearer, and much more fun.


